Dash Cam Power Adapter

How to Install a Dongar Hyundai IONIQ Dash Cam Power Adapter

This guide provides step-by-step instructions for installing the Dongar Hyundai IONIQ Dash Cam Power Adapter. The Dongar adapter allows you to power your dash cam directly from your vehicle’s rearview mirror harness, making installation clean and straightforward.

What You’ll Need

1. Dongar Hyundai/Kia Dash Cam Power Adapter (Model: 12PM-HY)
   • Product Page
2. Compatible Dash Cam with USB power cable
3. Basic tools:
   • Trim removal tool (optional but helpful)
   • A flashlight (for better visibility)
4. Owner’s manual for your Hyundai IONIQ (optional)

Step 1: Verify Compatibility

1. Check that your Hyundai IONIQ is compatible with the Dongar Dash Cam Power Adapter. This adapter is designed for Hyundai/Kia vehicles with a powered rearview mirror. If you do not have a powered rearview mirror, this will not work with your IONIQ.
2. This has been tested in Hyundai IONIQ Hybrid, Plug-In Hybrid, and Electric versions between the years 2017-2022. IONIQ 5 and IONIQ 6 have not been tested.
3. Confirm that your dash cam uses a USB power cable and requires no more than 2A of power at 5V.

Step 2: Locate the Rearview Mirror Harness

1. Sit in the driver’s seat and look at the rearview mirror mounting area.
2. Identify the wiring harness that connects to the back of the rearview mirror. This is typically enclosed in a plastic shroud.

Step 3: Access the Wiring Harness

1. Use your hands or a trim removal tool to carefully separate the plastic shroud covering the rearview mirror mount.
   • Tip: Be gentle to avoid damaging the clips or plastic.
2. Expose the wiring harness connected to the mirror.

Step 4: Connect the Dongar Adapter

1. Disconnect the wiring harness by gently pressing the release tab and pulling the connector out.
2. Plug the Dongar power adapter into the original wiring harness.
3. Reconnect the Dongar adapter to the rearview mirror port.
   • The adapter essentially “splits” the connection while adding a USB power output.

Step 5: Route and Connect the Dash Cam

1. Plug the USB cable from your dash cam into the USB port on the Dongar adapter.
2. Route the dash cam cable along the headliner and down to the dash cam, keeping it neat and secure.

Step 6: Test the Setup

1. Start your Hyundai IONIQ.
2. Verify that:
   • The rearview mirror functions as expected.
   • The dash cam powers on and operates correctly.
3. If the dash cam doesn’t power on, double-check all connections.

Step 7: Secure the Installation

1. Reattach the plastic shroud over the mirror mount.
2. Use cable clips or adhesive pads (if needed) to secure the dash cam cable along its route.

Troubleshooting

Dash cam doesn’t power on

Confirm that all connectors are fully seated. Verify the dash cam’s USB cable is functional by testing it with another power source.

Mirror features not working

Double-check the harness connections to ensure proper alignment.

Final Notes

• The Dongar Dash Cam Power Adapter eliminates the need for running wires to your vehicle’s fuse box or 12 volt socket, offering a clean and efficient power solution.
• For additional help, refer to the Dongar Technical Support page.

Enjoy your seamlessly powered dash cam with minimal wires!